|
Leg Length Monitoring System for 3
or 4 legged jack-up is typically for Safe area operation it
provides data on the leg length deployed below deck level in
either feet or metres.
The basic system includes digital displays. A PC station can also be
added and developed as a Marine Monitoring Data System. A
15" TFT screen can display leg length deployment with a
printer being included for hard copies.
With the PC option the system
archives leg length deployment data to enable event
analysis. Screen Display software includes rig mimics of
individual leg lengths deployed, relative deployment of each
leg, jacking motor positions and rotations and deck angle if the
inclinometer option is taken.
Additional Marine data can
readily be added and displayed, such as Air Gap, Hull Draft,
Deck Inclination, Meteorological conditions, Pre-Load tank data,
Bulk Tank data.
Typical
System Description
-
3-off jacking
motor Shaft Encoders
-
Stainless Steel
enclosure, housing PLC
-
UPS to save the
displayed data and power the system for a minimum period of up
to 30 minutes
-
PC station
-
Printer
-
Software and
Operating licence
-
Alarms can be set
on any parameter
To discuss further, or obtain
quotation please either complete enquiry
form or call on numbers above.
|
|
Typical PC Screen Display, showing enhanced
graphics and gives archiving capability
|
